The Tower 300 Limestone Micro Tower Chassis
The Tower 300 Bumblebee is an m-ATX case with a classic vertical case design and comes in an octagonal prism shape. It supports up to a 420mm AIO radiator on the right side and can accommodate up to eight 120mm/140mm fans.
$164 exc. VAT
The Legacy Continues
As the newest edition of the Tower Series, the Tower 300 Bumblebee inherited the classic vertical design
but was updated with a new octagonal prism shape to meet today’s aesthetics. It may be small but it sure can pack
a punch with support for up to 400mm GPUs, 420mm AIOs, and up to a 220mm PSU.
If cooling is a concern then the Tower 300 Bumblebee has you covered with being able to accommodate up to eight
120mm or 140mm fans. Also did someone say upgrades, well the Tower 300 Bumblebee has optional 3.9”
LCD screen kits as well as Horizontal Chassis stands sold separately so your build comes out exactly how you want it to.
Classic Vertical Body Design
The Tower series has been iconic for its vertical body designs and the Tower 300 Bumblebee follows in those footsteps.
However, with its new octagonal prism design we were able to not only increase the viewing areas
for the components inside but also allow for better airflow and bigger cooling options too.
This gives the Tower 300 Bumblebee the classic looks of its predecessors but with even better performance and updated styling.
Maximum Radiator Support
Supporting up to a 420mm AIO radiator on the right side of the case the Tower 300 Bumblebee is ready for some
of the most demanding hardware. And to assist that AIO with optimal chassis temperature is the ability to mount up to eight 120mm or 140mm fans.
Tool Free Panels for Easy Access
The Tower 300 Bumblebee features three 3mm tempered glass panels on the front
and two perforated panels on each side. All are easily removable without tools.
Two CT140 Fans Pre-Installed
The Tower 300 Bumblebee features two 140mm PWM fans on the top to provide good cooling performance.
Easy Installation
The Tower 300 Bumblebee comes with a dedicated fan/AIO bracket on the right side of the chassis
and is fully removable for easy installation. No more awkwardly holding fans and AIOs to mount to a chassis,
just removed the bracket and mount your choice of fans or AIO and then easily remount the bracket into the chassis and you are all set to go.
Intake and Exhaust
Classic to the vertical body design the Tower 300 Bumblebee does well when it comes to staying cool.
With dedicated intakes positioned to bring in cold fresh air and exhausts set up to vent the air the chassis
has already processed providing optimal temperatures at all times.
Handy I/O Ports
One USB 3.2 (Gen 2) Type-C and two USB 3.0 ports are placed on the top panel to grant direct access when needed.
P/N – CA-1Y4-00SIWN-00
SERIES – The Tower
CASE TYPE – Micro Tower
DIMENSIONS – 551 x 342 x 281 mm (22.5 x 14 x 11.5 inch)
WEIGHT – 8.3 kg / 18.3 lbs.
SIDE PANEL – 3mm Tempered Glass x 3
COLOR – Limestone
MATERIAL – SPCC
COOLING SYSTEM
Top(exhaust): 140 x 140 x 25 mm CT140 fan (1500rpm, 30.5 dBA) x 2
EXPANSION SLOTS – 4
MOTHERBOARD – 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX)
I/O PORT – USB 3.2 (Gen 2) Type-C x 1
PSU – Standard PS2 PSU (optional)
FAN SUPPORT
Top:
2 x 120mm, 1 x 120mm
2 x 140mm, 1 x 140mm
Right Side:
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2 x 140mm, 1 x 140mm
Rear:
2 x 120mm, 1 x 120mm
2 x 140mm, 1 x 140mm
Power Cover:
1 x 120mm
1 x 140mm
RADIATOR SUPPORT
Right Side(AIO):
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
CLEARANCE
CPU cooler height limitation: 210mm
VGA length limitation: 280mm(With power cover) 400mm(Without power cover)
PSU length limitation: 220mm
